How To Change Engine Oil At Home Honda Accord 2014

This pictorial guide includes a detailed step-by-footstep explanation and photos of how to change the oil and oil filter in a Honda Accord! Changing the oil in your vehicle saves yous non but time and coin, but also gives y'all the balls that the job is done correctly.

If you buy through links on our site, we may earn a small commission – at no price to you lot.

Why Change your Oil?

Changing the oil in your vehicle is one of the quickest and most satisfying maintenance tasks you can do yourself and is the gateway to more than complicated maintenance projects later. This chore involves very few steps and takes less than 1 hr to consummate.

Honda recommends 5w-xx motor oil for Accords made before 2011. For Accords made in 2011 or after, they recommend 0w-20 motor oil. I highly recommend using full-constructed motor oil in order to prolong the life of your vehicle.

The vehicle shown hither is a 2004 Honda Accord.  Here is a list of supplies and tools you will need.

List of Supplies and Tools Required:

• Mobil 1 EP HM Full-Constructed (5W-20) – recommended for 2003-2010 Honda Accords
• Mobil 1 EP Total-Synthetic (0W-20) – recommended for 2011-2020 Honda Accords
• Oil filter Mobil i M1-110A Filter – fits 2003-2018 Honda Accordance three.0 2.0 two.four 3.5.
• 17mm socket wrench
• funnel
• drain pan
• oil filter pliers (optional)
• torque wrench (optional)

Procedure to Change the Oil and Filter in a Honda Accord

1. Warm upwards the oil in the vehicle.
2. Remove the drain plug to drain the oil.
3. Supersede the drain plug.
4. Remove the former oil filter.
5. Lube the new oil filter.
6. Install the new oil filter.
7. Add Fresh oil.
8. Put the oil filler cap dorsum on.

Now nosotros'll accost each of these steps in more item with footstep-by-footstep instructions:

Step one: Warm Up the Oil

Perform an oil modify after the vehicle has already been running for a while or take information technology for a quick 10–15-minute drive to get the oil warmed up.

Step 2: Remove the Drain Plug and Bleed the Oil

Crawl under the vehicle and locate the oil pan and drain plug. The drain plug is located very near the heart of this photo.

Where is the oil filter located on a Honda Accord?

The oil filter on a Honda Accord is located just aft and above the oil pan as shown in the post-obit flick (orange).

Utilize a 17mm wrench or socket (overnice socket gear up) to remove the drain plug.

Have a drain pan ready every bit you loosen the drain plug. If you demand a drain pan, hither's an inexpensive one from Amazon. Later on breaking the commodities loose, usually yous can unscrew it the balance of the manner using your fingers.

Accept care not to driblet the bolt into the bleed pan as yous get to the end of the threads. Position the drain pan under the bleed hole as you remove the bolt. Then allow the oil drain for about ten-fifteen minutes.

Pace 3: Supercede the Drain Plug

Supplant the bleed plug bolt and snug it upward; torque it to well-nigh fifteen-twenty ft-lbs (squeamish torque wrench).

After the draining oil has slowed to a drip, supplant the bleed plug and snug it up. Don't overdo it. You want it tight, but not so tight that you lot are damaging the threads.

Pace 4: Remove the Old Oil Filter

Position the oil pan under the one-time oil filter while yous are unscrewing it. Information technology will drip oil when it is removed, and you lot want to catch as much of the oil equally possible.

If the filter is stuck, consider getting your hands on an oil filter removal tool.

Step 5: Lube the New Filter

Put some oil on the seal of the new oil filter.

Here's the new oil filter. It should accept the "7317" code. I accept used the basic FRAM filter in the past (and in this guide), but I now recommend the Mobil1 M1-110A filter due to ameliorate filtering capabilities – dual layer constructed filtering media as compared to the standard PH7317 filter.

Notation: Equally an interesting sidenote, this article shows several filters cut open for comparison.

Accept out the new oil filter. Yous desire to put a trivial oil on the new oil filter seal, so that it will create a nice seal. Apply your finger or a rag to wipe a sheen of oil effectually the circumference of the new oil filter seal.

Step 6: Install the new oil filter

Now that the erstwhile oil filter has been removed, this is what the oil filter zipper point looks similar.

Put the new oil filter on and start to tighten it.

When you lot experience resistance, get some other 1/2-three/4 plough or then. You lot don't want oil to leak out, only you likewise don't desire information technology then tight that yous tin't remove it by hand next time.

Step vii: Add fresh oil

You lot're at present ready to movement to the engine bay. Popular the hood and remove the oil filler cap. Get your 5 qt bottle of motor oil. Y'all can't get incorrect with the highly rated Mobil 1 Total-Synthetic motor oils (0W-twenty or 5W-20). Bank check out this postal service on the recommended oil to employ in a Honda Accordance.

Check the specifications in your possessor'southward manual for the amount of oil to add. For a 4-cylinder 2004 Honda Accord, the corporeality is four.4 qts.

Put the funnel into the oil fill up hole and pour in 4.four qts of oil.

You lot know when you are at 4.4 qts when at that place remains about 0.6 qts in a 5 qt jug.

Step 8: Put the oil filler cap dorsum on

Replace the oil filler cap.

One last matter that I should mention is that Honda Accords volition evidence a "Maintenance Required" Low-cal when it thinks the oil should exist changed. You will need to reset this calorie-free if it comes on later on you have changed oil. Check out this commodity for the process to reset the light is pretty straightforward.

Yous're now finished. Good work. Take the old oil to an automobile parts store, Walmart, or some other place that takes old oil for recycling.

Click here for more articles on Honda Accord maintenance!

List of Supplies and Tools Used in this Guide:

• Mobil 1 EP HM Full-Synthetic (5W-20) – 2003-2010 Honda Accords
• Mobil one EP Total-Constructed (0W-20) – 2011-2020 Honda Accords
• Oil filter Mobil one M1-110A Filter (or FRAM XG7317 Filter)
• 17mm socket wrench
• funnel
• bleed pan
• oil filter pliers (optional)
• torque wrench (optional)

To watch the video of this oil change, check out this link:

Source: https://practicalmechanic.com/2017/12/02/how-to-change-oil-in-a-honda-accord/

Posted by: veatchvoymber1977.blogspot.com

Share this post